The right way to Setup Management Sticks and Switches within the Mixes Web page on EdgeTX

18.7K

In case you’re utilizing EdgeTX, establishing management sticks and switches on the Mixes web page is crucial for flying your FPV drone. Whether or not you’re configuring the sticks for fundamental flight management or establishing switches for arming, flight modes, or different features, this information will stroll you thru the method step-by-step.

By the top of this tutorial, you’ll know tips on how to assign your management sticks to channels, arrange switches for various actions like arming or flight mode adjustments, and take a look at the setup to ensure every thing is working appropriately.

Take a look at my different EdgeTX associated posts: https://oscarliang.com/tag/edgetx/

Entry the Mixes Web page

To start, you’ll must open the Mixes web page in your EdgeTX radio. That is the place you’ll map your management sticks and switches to varied channels that your flight controller makes use of.

1. Flip in your EdgeTX radio.
2. From the Dwelling display screen, press the Mannequin button.
3. Navigate to the Mixes tab by both urgent the Web page button till you discover it or deciding on it from the menu should you’re on a touchscreen radio.

Right here, you’ll discover a listing of channels (e.g., CH1, CH2, CH3, and so forth.). Every channel could be mapped to a selected enter, like a stick or swap.

Assign Management Sticks to Channels

For many fashions, the primary 4 channels (CH1 to CH4) are usually assigned to the principle controls: roll, pitch, throttle, and yaw. For instance:

• Channel 1: Roll (Aileron)
• Channel 2: Pitch (Elevator)
• Channel 3: Yaw (Rudder)
• Channel 4: Throttle

Often, this must be robotically configured for you while you create a brand new mannequin, but when not, you are able to do it your self:

1. Channel 1 (Roll):
   • Spotlight CH1 utilizing the jog wheel and press to enter the setup.
   • Set the Supply to your aileron stick.
   • Optionally, you possibly can alter Weight (how a lot of the stick motion is handed by means of to the output) or apply Expo for smoother management.
2. Channel 2 (Pitch):
   • Spotlight CH2.
   • Set the Supply to the elevator stick.
3. Channel 3 (Throttle):
   • Spotlight CH3.
   • Set the Supply to the throttle stick.
4. Channel 4 (Yaw):
   • Spotlight CH4.
   • Set the Supply to the rudder stick.

Setup Switches

Now that your management sticks are configured, it’s time to assign features to your switches. These switches can be utilized for varied duties like arming, altering flight modes, or activating options like a buzzer or GPS rescue.

 

Setting Up an Arm Swap

In ExpressLRS, it’s really useful to make use of Channel 5 (CH5) for the Arm swap. Right here’s tips on how to set it up:

1. Spotlight CH5 within the Mixes web page.
2. Press the jog wheel to enter the combo setup.
3. Scroll to Supply and flip the swap you wish to use for arming (e.g., SD). The swap you flip will robotically seem because the supply, so that you don’t must manually search by means of an inventory.
4. Depart the remaining settings at their default values.

Setting Up a Mode Swap

For configuring flight modes (e.g., Acro Mode, Angle Mode, Horizon Mode), you’ll usually use a 3-position swap. Let’s use CH6 for this instance.

1. Spotlight CH6 within the Mixes web page.
2. Assign a 3-position swap (e.g., SC) to manage the completely different flight modes.

 

How Many Switches Can You Set Up?

Most radios include extra switches than you’ll ever want. Whilst you can assign all of them to the out there channels, it’s normally not needed. For many FPV drone setups, you’ll solely want a number of switches.

The variety of channels out there depends upon your radio hyperlink. In ExpressLRS, you possibly can have 8 to 16 channels based mostly on the swap mode. The default setup for many FPV drones permits for 12 channels, with 8 channels out there for switches after the primary 4 are used for management sticks.

How Many Switches Do You Actually Want?

For many FPV drones, I usually use 3-4 switches:

• Arm swap: To arm/disarm the drone.
• Buzzer swap: To find the drone when misplaced.
• Flight mode swap: To toggle between Acro, Angle, or Horizon modes.
• GPS Rescue Mode swap (if relevant): To allow GPS Rescue in case of sign loss.

Check Your Setup

As soon as your sticks and switches are mapped, it’s necessary to check them:

1. Join your drone and open the Receiver tab in Betaflight (or your flight controller’s configuration software).
2. Transfer the sticks and flip the switches to see if the corresponding channels are responding appropriately. In case your drone must be powered for this step, take away the propellers earlier than connecting the battery for security.

Now you possibly can transfer on to assigning features to these auxiliary channels you simply setup in Betaflight modes

Conclusion

Organising management sticks and switches within the Mixes web page of your EdgeTX radio is a key step in configuring your FPV drone for clean, responsive management. Whether or not you’re assigning management sticks to fundamental features or configuring switches for arming and flight modes, following these steps will be certain that every thing is mapped appropriately and prepared for flight.

Edit Historical past

• Sep 2018 – tutorial created
• Sep 2019 – up to date
• Oct 2024 – up to date for EdgeTX and ExpressLRS