The OasisFly25 from Sub250 is an thrilling 2.5-inch FPV drone, outfitted with the DJI O3 air unit and weighing below 250g, making it good for compact, freestyle flying. This drone is sufficiently small to slot in your pocket but packs loads of energy. It’s designed for many who love the joys of freestyle flying in tight areas or parks. On this evaluation, I’ll stroll you thru my expertise with the OasisFly25, together with its specs, efficiency, flight traits, and whether or not it lives as much as the hype.
The place to Purchase
You should buy the OasisFly25 from these distributors:
The drone is on the market with the DJI O3 system and a receiver put in, however there’s additionally a plug-and-play model if you wish to use a unique FPV system and receiver.
Contained in the field, you’ll discover the drone and two accent packing containers containing:
- Two units of HQ 2.5×2.5×3 tri-bladed propellers
- Stickers and manuals
- Spare screws, standoffs, and a hex key
- 3D-printed digital camera holders (together with one for a unadorned GoPro)
- USB-C adapter for the flight controller
Observe that batteries are bought individually: https://oscarliang.com/product-fmf7
Spare propellers: https://s.click on.aliexpress.com/e/_Dkaokyp
Specs
- Flight controller: F7 with 35A ESC, which is spectacular for a 2.5-inch drone
- Body: Sub250 Oasis Body, 135mm wheelbase, with 2mm prime plate and a couple of.5mm backside and arm thickness
- Flight controller: Redfox A3 F722 45A AIO
- Digital camera/VTX/Antenna: DJI O3 Air Unit
- Motors: Sub250 1404 4500kv
- Propellers: HQ2.5×2.5×3
- Receiver choices: PNP, TBS Crossfire Nano, ELRS 2.4G
- Battery connector: XT30
- Really helpful battery: 4S 530-730mAh LiPo (not included)
- Weight: 174g (with out battery), 241g with 4S 720mAh
Construct High quality and Design
The OasisFly25 boasts a glossy and sturdy design, combining carbon fiber and CNC aluminum for power and stability. The easy, efficient design means it’s simple to take aside when you have to restore it. The body options replaceable arms, permitting you to swap out damaged arms while not having to switch your entire body. Spare body components can be found on the Sub250 web site.
Weighing 174g with out a battery and 241g with a 720mAh 4S pack, the drone is maybe a bit of heavy for a 2.5″ drone, however the construct could be very sturdy. The DJI O3 system offers a top-notch video feed, making this a fantastic drone for recording high-quality footage.
The lengthy body physique design means the propellers will not be seen within the FPV digital camera’s view, so it doesn’t wreck your shot which is nice. There’s sufficient room so that you can place a secondary digital camera like a bare GoPro if you want.
One minor draw back is the absence of a USB port on the flight controller, requiring a particular dongle to configure Betaflight. Whereas not a deal-breaker, it provides some inconvenience if you have to make frequent adjustments.
The OasisFly25 body may accommodate the Walksnail Moonlight Digital camera and an analog setup, including versatility.
The OasisFly25 has a sturdy development and it could possibly take a beating, however I’d nonetheless advocate getting additional props and arms simply in case. I had a couple of crashes throughout testing, and the drone held up effectively, with solely minor scratches on the motors and body. The 3D-printed motor protectors additionally did their job, absorbing affect and holding the motors in fine condition.
Flight Efficiency
Now, let’s speak about the way it flies.
Utilizing the really useful 4S 720mAh LiHV battery brings the entire weight to 241g, which is barely heavy for a 2.5″ FPV drone. This setup gained’t go away room for a unadorned GoPro if you wish to keep below 250g, however the drone nonetheless performs extremely effectively.
Proper from the primary takeoff, I used to be impressed by the drone’s energy. Regardless of its small measurement, it gives glorious acceleration and stability, even in very windy situations. It hovers effortlessly at 25% throttle, and with just a bit throttle punch, it shoots up like a rocket. I used to be flying in 23MPH wind, the drone nonetheless felt locked in and steady, with little or no propwash throughout aggressive maneuvers, and it wasn’t overly noisy.
Though the additional weight diminished some effectivity, the drone nonetheless dealt with effectively, providing about 5 minutes of aggressive flying. If you happen to’re cruising, you possibly can stretch the flight time to over 7 minutes. The OasisFly25 strikes a superb steadiness between agility and effectivity.
With no propellers in view, you possibly can seize clear footage whether or not you’re flying slowly or quick. The antenna efficiency was glorious, sustaining a robust sign all through my flights.
That is most likely among the finest 2.5″ quads with the DJI O3 I’ve flown for freestyle. It has that “flingability” you get from bigger quads like a 5″, possible because of its heavier weight. It’s received the punch to throw round simply within the air, and inverted strikes and dives are clear and clean, with out the uncontrollable washout seen in lighter micros. These qualities are key for a superb freestyle quad. Whereas it’s not as highly effective as a 5″, it’s nonetheless responsive, punchy, and agile. Importantly, it’s quiet, so it gained’t disturb individuals close by.
When flying in tighter areas just like the woods, I used to be largely working between the 20% to 30% throttle vary, just like a 5″, however it was a lot simpler to maneuver because of its lighter weight and nimbleness in comparison with a bigger quad.
I additionally examined smaller batteries, like a 4S 450mAh, however the flight time was virtually halved in comparison with the 720mAh. Whereas the lighter weight did enhance flight efficiency, the diminished flight time didn’t justify the trade-off in my view. I’d advocate sticking with the 4S 720mAh from Sub250 for the very best general efficiency: https://oscarliang.com/product-fmf7
What Might Be Improved
I don’t a lot a lot unfavourable to say in regards to the Oasisfly25, fairly completely satisfied about its design and efficiency actually. The one factor is weight.
The body’s sturdiness provides additional weight, and whereas this contributes to its sturdiness, I’d have most popular a lighter construct for higher effectivity and agility. Nevertheless, the trade-off for sturdiness is comprehensible.
You’ll be able to scale back weight by eradicating the 3D-printed ft or utilizing the Flywoo O3 bare package to make the DJI O3 Air Unit 15+ grams lighter. Changing the unique O3 antenna with light-weight dipole antennas may shave off a couple of grams, which is an inexpensive alternative for many customers who gained’t be flying lengthy vary with this mannequin.
One other minor suggestion: making the battery lead barely longer would scale back stress on the solder joints.
Lastly, I’d like to see a bit extra safety for the DJI O3 digital camera, a small protruded 3D printed piece connected to the entrance of the underside plate would do a superb job. For now I feel it’s essential to make use of an ND filter, or only a clear UV filter to guard the lens from scratching: https://oscarliang.com/flywoo-nd-filter-o3/
The right way to Setup
The flight controller comes pre-installed with Betaflight 4.4.3 (firmware goal: SUB250REDFOXF722AIO). The ESC comes with BLHeli_32 firmware 32.9.
To arrange this drone for first flight, here’s what I did:
Binding ELRS Receiver
- The ExpressLRS receiver comes with ELRS 3.3.1 firmware, with the goal Sub250 2400 RX.
- Energy the receiver (by way of battery or USB) and anticipate it to enter WiFi mode (indicated by a quickly flashing LED).
- Connect with the ExpressLRS receiver’s WiFi community in your telephone, open browser and go to 10.0.0.1, and enter your binding phrase.
- Comply with different binding strategies, see my detailed directions right here: https://oscarliang.com/bind-expresslrs-receivers/.
Binding DJI O3 Air Unit
Betaflight Setup
- Set your personal charges.
- Configure switches for arm, angle, beeper, and turtle mode.
That’s it!
Last Ideas: Is the Sub250 OasisFly25 Price It?
Completely! The Sub250 OasisFly25 FPV drone gives unbelievable efficiency in a compact, sturdy design. It’s quick, responsive, and excels at freestyle flying. Though it’s barely heavier than perfect, the sheer enjoyable and flexibility it offers make up for the added weight.
For $396 with the DJI O3 system, the OasisFly25 is well-priced and excellent for each learners and skilled pilots on the lookout for a transportable, sub-250g freestyle drone. You should buy the OasisFly25 from these distributors:
If you happen to’re out there for a strong and compact freestyle drone, the OasisFly25 is a stable alternative that gained’t disappoint.