DJI Neo – Preliminary Setup Information (with Video)


Have you ever obtained a brand new DJI Neo lately? If that’s the case you may need just a few questions on setting the Neo up for its first flight.

On this article and video tutorial we can be contemplating the next:

  • What’s within the varied combos
  • The Clever Flight Modes
  • Charging all the batteries
  • Downloading and putting in the DJI Fly Software program
  • Performing the primary Firmware Replace

In case you are both new to drones or skilled, you may need observed that the DJI Neo is exclusive within the DJI EcoSystem: you possibly can fly the Neo with no controller, with solely your cellphone, or with a DJI distant controller and DJI Goggles 3. 

With so many points of the Neo that may be lined, at present we are going to deal with what is required to get the Neo out of the field and up within the air. 

We’ll go into all the varied flight modes and methods to regulate the Neo in future movies.

Combos/Packages

Drone-only Package

  • DJI Neo
  • Clever Flight Battery x 1 – put in
  • Spare propeller x 2
  • Screwdriver
  • USB-C charging and knowledge cable


DJI Neo Drone 4K UHD Mini Quadcopter

135g Self Flying Drone that Follows You, Palm Takeoff, AI Topic Monitoring, QuickShots, (Controller-Free) Bundle with Deco Gear Equipment


Purchase from Amazon

We earn a fee when you make a purchase order, at no extra price to you.

12/26/2024 06:43 pm GMT

Combo Package deal

  • DJI Neo
  • Clever Flight Battery x 3
  • Charging Hub
  • Spare propeller x 2
  • Screwdriver
  • USB-C charging and knowledge cable

Our Decide

DJI RC-N3 Combo Package deal

  • DJI Neo
  • DJI RC-N3 Distant Controller
  • Clever Flight Battery x 3
  • Charging Hub
  • Spare propeller x 2
  • Screwdriver
  • USB-C charging and knowledge cable

The DJI Neo

Trying on the Neo, we see it’s fairly small in hand and may be very light-weight.

Picture Credt: Dan Bayne/Droneblog

Beginning with the entrance, a small gimbal guard protects the Neo’s single-axis gimbal. 

Not like conventional digital camera drones, which usually have three-axis gimbals, the single-axis gimbal on the Neo is electronically stabilized. 

The stabilization on the DJI Neo is much like that of DJI’s motion cameras, which make the most of DJI’s proprietary EIS (Digital Picture Stabilization) know-how.

To take away the gimbal cowl, merely press down on the duvet with 2 fingers and pull the duvet off.

Picture Credt: Dan Bayne/Droneblog

Persevering with across the drone, we see two buttons: one on the rear and one in the direction of the entrance. The button in the direction of the entrance is used to decide on the varied autonomous flight modes. 

The DJI Neo clever flight modes are:

  • Observe Me
  • Dronie
  • Circle
  • Rocket
  • Highlight
  • Customized – this permits the person to outline precisely what the flight mode does

To decide on the flight mode, press the choice button till you find your required mode. 

The button on the rear of the Neo is dual-purpose: it turns the Neo on and off and can be used to pair the Neo with a bodily distant management. 

To energy on the Neo, press the ability button as soon as then maintain it, you’ll hear an audible tone and see the LED gentle up. To show the Neo off, you’ll press the ability button as soon as after which maintain it. 

Beneath the ability button on the again, there’s a USB-C port that can be utilized to:

  • cost the battery when put in within the Neo
  • replace the Neo’s firmware, utilizing the equipped knowledge and charging cable – which we’ll talk about additional on this article, and
  • switch footage from the inner storage to a pc or cell gadget

Relating to inner storage, you’ll discover there is no such thing as a SD card slot on the Neo.

It is because, just like the non-Professional variations of DJI’s Mini drones, the Neo doesn’t use Micro SD playing cards. All footage from the Neo is saved on 22 GB of inner storage.

Fortunately, along with accessing the footage from a PC or Mac, footage might be wirelessly transferred to a cell gadget utilizing DJI’s QuickTransfer characteristic.

Sensors

On the backside of the Neo, there are infrared imaginative and prescient sensors. These sensors assist the Neo stay secure and keep a gentle hover. 

Picture Credt: Dan Bayne/Droneblog

Though the Neo does an important job monitoring topics, it doesn’t have impediment avoidance sensors. The dearth of those sensors can lead to a crash if flying near obstacles.

Clever Flight Batteries

The clever flight batteries present the Neo with as much as 17 minutes of flight time, with the prop guards put in. 

Picture Credt: Dan Bayne/Droneblog

If the propeller guards are eliminated, the flight time will increase to 18 minutes. In fact, flight instances will differ primarily based on precise flight situations.

To take away the battery, press the tab and slide out the battery. To place the battery again in, align the grooves on the battery with these on the Neo and slide the battery in. You’ll hear a click on when the battery sits accurately.

To Cost the Batteries

There are two other ways to cost the Neo’s batteries.

Sadly, as with most of DJIs latest drones, a wall charger is just not included. Whereas DJI suggests utilizing their 65-watt charger, we’ve discovered that any 65-watt and even 100-watt PD charger’s will work properly.

When you’ve got the Drone Solely equipment, you have to to cost the battery whereas it’s inserted into the Neo.

To cost the one battery inside the Neo, find the USB-C port on the rear of the Neo. Plug the equipped USB-C charging cable into the port after which into your charger.

Picture Credt: Dan Bayne/Droneblog

When you’ve got both of the Combo Packages, with the three batteries and battery hub, it is possible for you to to cost all three batteries, concurrently, within the hub. This may be achieved with any charger rated 45 watts or larger.

To verify how a lot battery energy is left within the batteries, whereas within the charging hub, press the ability button on the aspect of the hub.

To cost the batteries inside the battery hub, guarantee they’re absolutely seated within the hub. Plug the charger into an outlet after which plug within the equipped USB-C cable into the hub. After a second you will notice the batteries start to cost.

Picture Credt: Dan Bayne/Droneblog

When you opted for the combo with the RC-N3 distant controller, additionally, you will must cost the RC.

To cost the RC-N3 Distant Controller, find the USB-C port on the underside of the controller and plug it in. 

When charging begins, the LEDs on the entrance of the distant controller will start to blink, signifying charging.

DJI Fly Software program

With all the batteries charged and able to go, there’s a crucial step wanted to start out flying the Neo.

Sure, the Neo is exclusive in that it doesn’t want a controller or a cellphone to fly, nevertheless, to fly the Neo, you have to to activate it and replace the firmware, utilizing your cellphone. 

To do that, you have to to have the DJI Fly app put in in your cellphone.

If utilizing an iPhone, you possibly can seek for the DJI Fly app within the Apple App Retailer.

The DJI Fly app for Android is barely accessible on-line on DJI’s website.

The place to Obtain DJI Fly

In case you are utilizing both an Android or iOS cellphone, the hyperlinks to obtain the DJI Fly app are as follows:

Moreover, out of your smartphone, you are able to do a Google Seek for “DJI Obtain Middle”.

Within the outcomes, select DJI Fly and you can be dropped at the software program downloads web page.

Be aware: the DJI Fly app for Android is barely accessible on-line on the hyperlink above, and is not accessible within the Google Play retailer, whereas the iOS model for Apple units is accessible by way of the App Retailer.

Activating the DJI Neo

STEP 1: After you’ve put in the DJI Fly app, open DJI Fly. Subsequent activate the Neo by urgent the ability button as soon as, then holding the ability button.

STEP 2: On the left of the principle DJI Fly house display, you will notice a glowing define across the message: “QuickTransfer – New DJI-NEO-xxxx detected”. Faucet that field.

The Neo will now begin the method of connecting to the DJY Fly app, by way of WiFi.

STEP 3: Press and maintain the ability button on the Neo for 3 seconds. After just a few seconds, try to be introduced with the choice to hitch the Neo’s WiFi community. – press JOIN.

After just a few seconds, the Neo can be paired with the DJI Fly app.

STEP 4: On the Activate DJI Machine display, select ACTIVATE. At this level both log in together with your DJI account you probably have one or create a brand new account.

As soon as logged in, the Neo will start activating. You may both select to Bind the Activation code or SKIP. After you make your alternative, you’ll be introduced again to the principle DJI Fly house display.

Putting in the Neo Firmware

At this level, you have to to put in the brand new Neo Firmware. 

On the primary DJI Fly house display, select INSTALL (on the proper aspect of the display) to start the method. Faucet DOWNLOAD and the brand new firmware will start putting in on the Neo.

The method can take a couple of minutes to finish. After 100% completion, the firmware can be absolutely put in.

In case your Neo doesn’t routinely restart after the firmware has been up to date, flip the Neo again on, then faucet CONNECT on the principle display.

You’ll then be introduced into the Neo part of DJI fly the place you possibly can both watch just a few getting began tutorials or skip to the principle web page with choices to alter the parameters of the varied clever flight modes.

Leave a Reply

Your email address will not be published. Required fields are marked *