Establishing your DJI Avata 2 Drone for the primary time might be an thrilling expertise. On this tutorial, I’ll information you thru the steps to get your drone prepared for its maiden flight and share some suggestions and methods to reinforce each your flight and digicam picture high quality.
If you’re nonetheless on the fence about whether or not it is best to get the DJI Avata 2 FPV drone, take a look at my detailed evaluate: https://oscarliang.com/dji-avata-2/
In case you determine to get the DJI Avata 2, I like to recommend getting the Fly Extra Combo which comes with 3 batteries:
Listed here are the helpful equipment you may get in your Avata 2: https://oscarliang.com/dji-avata-2-accessories/
Step-by-Step Setup Information for Maiden Flight
Unboxing: Unbox your DJI Avata 2 and guarantee you might have all the mandatory parts: the drone, controller, batteries, charger, propellers, and documentation.
Charging: Cost the drone’s battery utilizing the included charger. It’s additionally a good suggestion to cost the controller and any spare batteries.
Energy On: Start by powering on the DJI Goggles 3, Movement Controller, and the Avata 2 Drone. Press the ability button as soon as permits you to test battery voltage, and should you press and maintain the button down once more till all inexperienced LEDs gentle up, it activates the goggles.
Goggles Tutorial: The FPV Goggles will information you thru a tutorial explaining tips on how to navigate the menu and use the movement controller to regulate your drone.
Activation: Earlier than your first flight, it’s good to activate the goggles (the drone and distant don’t require separate activation). Join the USB-C port of the goggles to a cellular system, launch the DJI Fly App, and comply with the prompts for activation. You may obtain the app from DJI’s official obtain web page: https://www.dji.com/uk/avata-2/downloads
Alternatively, you should use a pc by downloading and putting in the newest model of DJI Assistant 2 (Shopper Drone Collection) from the identical hyperlink. In case you beforehand put in this for different DJI fashions just like the O3 or authentic Avata, make sure you replace to the newest model.
Firmware Replace: The app will immediate you to replace the firmware.
Linking: Usually, the drone ought to already be linked to the movement controller and goggles proper out of the field, eliminating the necessity for handbook pairing.
As soon as activated and up to date—a course of that ought to take not more than 10-Quarter-hour—you’re prepared for takeoff.
Flying Avata 2 with Movement Controller
For learners, the Movement Controller would possibly really feel overwhelming as a result of there are such a lot of buttons. Even for knowledgeable pilots, it takes some getting used to. Listed here are the fundamentals to get you began:
- Arm the drone: Double-press the lock button to arm the drone, motors will begin spinning.
- Disarm: Double-press the lock button once more to disarm, the motors will cease.
- Takeoff: With the drone armed, press and maintain the Lock button to provoke takeoff. The plane will ascend to about 1.2 meters and hover.
- Braking: Throughout flight, press the lock button to make the plane brake and hover in place. Press it once more to renew flying.
- Touchdown: To land, press and maintain the lock button whereas the plane is hovering. It’ll land mechanically and shut off the motors.
- Digicam Management: Regulate the digicam angle by tilting the movement controller up or down.
- Yaw Management: Gently press the set off and tilt the distant left or proper to pan the drone.
- Lateral Motion: Use the joystick to maneuver the drone left or proper. Pushing it up or down adjusts the drone’s altitude, ascending or descending at about 1 meter per second.
- Ahead Flight: To maneuver ahead, merely press the set off all the way in which.
- Flying Up and Down: For upward or downward flight, press the set off absolutely and tilt the controller up or down.
Superior Flying Strategies
By default, your DJI Avata 2 will likely be in Newbie mode, which is designed to be very sluggish and protected for brand spanking new pilots. On this mode, you’ll be able to’t swap flight modes, which helps stop accidents whilst you’re nonetheless studying. Nonetheless, as soon as you’re feeling assured with the fundamentals, you’re able to take the following step.
Switching Off Newbie Mode: Go to Settings -> Management to show off Newbie mode. This may unlock the drone’s full capabilities and assist you to swap between totally different flying modes.
Sport Mode: By urgent the flight mode button, you’ll be able to activate Sport mode. Consider it as Regular mode with a big pace enhance. It’s excellent for once you desire a bit extra pleasure and an opportunity to essentially see what your drone can do.
Turtle Mode: In case you’re conversant in Betaflight, you’ll admire Turtle mode. This setting helps the Avata 2 get better from crashes by flipping itself right-side up. It’s extremely helpful in case your drone finally ends up the wrong way up after a mishap, saving you a visit to retrieve and manually reset it. Yow will discover Turtle Mode within the Settings Menu.
Actual-time Dwell View
By double tapping actually onerous on the appropriate facet of the goggles, you’ll be able to activate realtime stay view of your surrounding utilizing the 2 entrance dealing with cameras.
By default it’s on 2D mode which solely makes use of one of many two cameras. You may set it to 3D within the Settings-> Show which makes use of each cameras and truly improves usability IMO.
Head Monitoring
Head Monitoring is an enchanting function that enhances your flying expertise by linking digicam motion to your head actions. Right here’s the way it works:
To allow Head Monitoring, go to the highest menu of your Goggles. This permits the digicam gimbal to maneuver up and down as you progress your head up and down. While you look left or proper, the drone will pan in that course (because the gimbal doesn’t transfer in horizontal axis).
Initially, controlling the digicam along with your head whereas directing the drone with the movement controller would possibly really feel a bit unnatural. Nonetheless, with some observe, you’ll be able to obtain dynamic and artistic pictures which are troublesome to duplicate with conventional controls.
It’s vital to say that Head Monitoring solely works with the Movement Controller and isn’t supported by the Distant Controller 3.
Return to Residence
Maintain down the flight mode button can activate return to dwelling (RTH) throughout flight. Throughout return to dwelling you’ll be able to achieve again management by urgent the Lock button. It’s very correct, touchdown inside 1 meter of the house level.
DJI Avata 2 additionally assist Low Battery RTH and Failsafe RTH.
Linking Units
Your Avata 2, distant, and goggles needs to be linked proper out of the field. Nonetheless, if it’s good to re-link them for any motive, right here’s tips on how to do it. Observe that there’s no devoted hyperlink button on the brand new gadgets – to place them in hyperlink mode, you merely maintain the ability button for five seconds.
- Plane: With the drone powered on, press and maintain the ability button till you hear a steady beep, indicating the battery degree LEDs are blinking in sequence.
- Goggles: With the goggles powered on, press and maintain the ability button till the goggles begin to beep repeatedly.
- Completion: Linking is full when the beeping stops, and that the plane’s battery degree LEDs flip stable.
- Now repeat this for the distant, and the goggles.
Observe: There’s no must hyperlink the plane on to the distant as they impart by the goggles.
Firmware Replace
Personally I don’t rush to replace firmware – generally new firmware would possibly include some type of new restrictions. I at all times wait and see what the neighborhood’s suggestions is earlier than updating.
After a firmware replace, at all times restart your plane, distant controller, and goggles earlier than takeoff. This ensures all new settings take impact appropriately.
Vital: Firmware updates can reset flight parameters like RTH Altitude and Most Flight Distance. Be sure to notice your most popular settings beforehand and reapply them post-update.
If the replace fails, restart the plane, distant controller, goggles, and both the DJI Fly app or DJI Assistant 2 (Shopper Drone Collection). Then, try the replace once more.
FCC Unlock
Sadly DJI Avata 2 doesn’t assist manually switching amongst FCC, CE, and SRRC. The plane will determine the nation and area the place it’s positioned in line with the situation of the cellular system and the GPS of the plane, and swap between FCC, CE, and SRRC following native legal guidelines and laws.
Whereas the ham file hack doesn’t unlock further channels because it used to within the authentic Avata and Goggles 2, it does improve RF output energy, permitting the drone to function in what seems to be an FCC RF energy mode. This hack additionally unlocks the pace limitations within the EU.
Merely get the file “ham_cfg_support” and unzip it to the foundation listing of the SD card and put it within the DJI Goggles 3. Obtain right here: https://drive.google.com/file/d/1ug2U_i5kdrKQQ2I17NLJBXm2tKQeNj5Q/view?usp=share_link
There are third celebration apps that may unlock FCC mode on the Avata 2, however they aren’t free. You too can strive a free app known as B3YOND however unavailable on iOS and works in older Android variations.
Greatest Transmission Settings
For CE customers, channel mode is about to Auto and can’t be modified, so you’ll be able to skip to the following part.
For FCC customers, the next are my really helpful transmission settings.
Channel Mode: Set to Handbook to realize full management over transmission settings.
Frequency: Select between 2.4GHz or 5.8GHz. 2.4GHz for higher penetration by obstacles however restricted to at least one pilot at a time as a result of its slim bandwidth (only one channel out there). It additionally interferes with 2.4GHz radio hyperlinks comparable to ExpressLRS, so DO NOT use 2.4GHz once you or different pilots are utilizing 2.4GHz radio hyperlinks. 5.8GHz is preferable should you plan to fly with others, because it affords a lot wider bandwidth. Relying on interference, you might discover one frequency affords higher sign than the opposite, if unsure, strive each and examine bitrate.
Bandwidth: Larger bandwidth supplies higher picture high quality however will increase the probability of interference with different pilots. When flying solo, you’ll be able to safely use 60MHz or 50MHz. When flying in teams, think about lowering the bandwidth to 50MHz, 40MHz, and even 20MHz to reduce interference.
Utilizing 5.8Ghz, it is best to have 3 channels with 60MHz and 50MHz bandwidth. In case you solely have 1 channel out there, you should use the “ham file” hack to unlock the remainder of the channels, obtain the ham file and place it within the root listing of your goggles SD card: https://oscarliang.com/dji-fpv-system-fcc-700mw/#DJI-Goggles-2-and-O3-Air-Unit
Greatest Digicam Settings
To get essentially the most out of the DJI Avata 2, I’ve discovered these digicam settings produce nice consequence for video high quality.
For finest flying expertise and don’t care a lot about recording:
- Mode: Auto
- Decision: 1080p 100FPS
- Colour: Commonplace
For finest cinematic footage:
- ND filter is a should, see why: https://oscarliang.com/nd-filter-fpv/
- Mode: Handbook
- ISO: 100 (or as little as attainable relying in your lighting), or Auto (then set Max ISO to 400 or 800 for additional flexibility)
- Decision: 4K 60FPS (Keep away from 30FPS as a result of latency is simply too dangerous for flying)
- Shutter Pace: 1/120
- WB: Put White Steadiness on Auto first and see what the system select, then lock in with that worth, so WB is fastened throughout flight
- FOV: Extensive
- Colour: D-Log M (should you coloration grade), or Commonplace (should you don’t coloration grade)
- EIS: OFF (should you use Gyroflow), or Rocksteady
- Sharpness: -1 (you’ll be able to improve sharpness in publish)
- Noise Discount: 0 (or +1 for lowlight reduces noise at the hours of darkness space)
For stabilization, the Avata 2 affords three modes: RockSteady, HorizonSteady, and Off. RockSteady is the default setting, offering strong stabilization. You may change this within the Settings > Digicam > EIS menu of the goggles. In case you desire to stabilize footage post-flight, disable EIS and set the digicam to large mode to assist Gyroflow offline stabilization.
Native facet ratio is 4:3, by switching to 16:9 it has the highest and backside cutoff.
Some testing on Noise Discount worth, has an influence on shadow element and lowlight.
Some comparability on sharpness worth, personally I desire -1, however that’s private desire.
Video bitrates underneath totally different decision/body charge:
- 4K 60fps: 130Mbps
- 4K 50fps: 120Mbps
- 4K 30fps: 90Mbps
- 2.7K 60fps: 100Mbps
- 2.7K 50fps: 90Mbps
- 2.7K 30fps: 70Mbps
- 1080p 120fps: 80Mbps
- 1080p 100fps: 70Mbps
- 1080p 60fps: 50Mbps
- 1080p 50fps: 40Mbps
- 1080p 30fps: 25Mbps
Use Distant Controller 3
The Distant Controller 3 permits you to fly in full handbook mode. You have to activate the RC3 first and replace its firmware by way of the DJI Fly App or DJI Assistant 2 earlier than utilizing it.
To hyperlink the Distant Controller 3 to your DJI Goggles 3, comply with these directions:
- Goggles: With the goggles powered on, press and maintain the ability button till the goggles begin to beep repeatedly.
- Distant: With the distant powered on, press and maintain the ability button till it begins beeping.
- Completion: Linking is full when the beeping stops, and that the plane’s battery degree LEDs flip stable.
Observe: the Movement Controller will nonetheless work along with your drone, however you’ll be able to solely use one controller at a time, relies on which one connects to the Goggles 3 first.
Assign handbook mode to the mode button: Within the Goggles Settings->Controls->Distant Controller->Button Customization, set Customized Mode to Handbook Mode.
In case you intend to fly in handbook mode, be sure to take away throttle stick self centering. By eradicating the again deal with rubber, you’ll discover two screws – tighten each screws will take away throttle stick self centering. By loosening or tightening each screws barely adjusts the friction, takes a little bit of trial and error to get it proper.
You may swap between Regular/Sport/Handbook flight modes utilizing the mode button.
To arm and disarm the drone in Regular/Sport modes, use these stick positions.
To arm and disarm the drone in Handbook mode, double press the Begin/Cease button. You may alter the digicam angle utilizing the highest left rotary swap.
In case of emergency, you should use the “Flight pause/Return to dwelling” button in any flight mode:
- Press as soon as the quad will cease and hover in place, and put it in Regular Mode.
- Press and maintain and it’ll activate return to dwelling; to cancel RTH, press it another time.
Set your charges and expo, I’m utilizing these for freestyle flying:
- 120/800/0.5
- 120/800/0.5
- 140/650/0.5
What to Do When Shedding Sign
While you lose video, it’s probably that you simply nonetheless have RC sign. Subsequently It’s finest to let go of the sticks; the Avata 2 ought to provoke return to dwelling mechanically.
Different Suggestions and Methods
When flying over the altitude peak restrict, the drone will go into Regular mode and gained’t allow you to fly any increased. You may improve the peak restrict as much as 500 meters (in Settings->Security), however it is best to comply with your native laws. There’s no strategy to take away the altitude restrict, in order that’s one other draw back in comparison with an FPV drone.
The DJI Avata 2 features a useful ‘Discover My Drone’ function. To entry it, navigate by the goggles menu to Settings > Security > Discover My Drone. This function reveals video footage from the 30 seconds earlier than the drone was misplaced, aiding in its restoration. The footage is saved in inside reminiscence so SD card just isn’t required. Moreover, if the drone nonetheless has battery energy, you’ll be able to activate the ESC Beeping operate underneath the identical menu to make the drone’s motors beep, serving to you find it by sound.
A helpful trick for goggle customers: place a chunk of tape on the sensor between the lenses. This prevents the screens from turning off once you take away the goggles, avoiding the transient delay when turning them again on.
Battery charging: as quickly as you insert the batteries into the charging hub, it is going to begin charging mechanically. It’ll at all times begin with the one with highest energy degree so it finishes faster. If all of your batteries are low in energy degree, you’ll be able to switch the remaining cost into one single pack so you’ll be able to fly a bit longer – merely insert all of the batteries within the hub, press and maintain the ability button till the LED turns inexperienced. To cease, press and maintain the button once more.
To cost batteries within the subject, I’ve been utilizing the Speedybee Discharger with a giant 6S 10000mah LiPo. This is sufficient to recharge 6 of the Avata 2 batteries.
File Switch
Transferring recordsdata to a telephone:
The Avata 2 facilitates file switch by way of Wi-Fi by the DJI Fly app. Merely energy on the drone, activate the QuickTransfer operate within the app, and make sure that the drone and telephone are inside 2 meters of one another with out obstructions.
Transferring recordsdata to a pc:
Join the drone to your laptop utilizing a USB cable with out powering on the Avata 2, an exterior drive ought to seem. If utilizing a reminiscence card, you’ll be able to immediately insert the cardboard into your laptop’s card reader.
Dwell Feed Sharing (Video Out)
Dwell feeds might be shared in 3 ways:
- Wi-Fi wi-fi sharing: Allow display sharing from the DJI Goggles 3 to a cell phone by way of Wi-Fi. Join the cellular system to the Goggles 3 by way of Wi-Fi and use the DJI Fly app to view the drone’s stay feed. This technique helps connection to just one cellular system. The latency is over 100ms, so it’s not superb for flying utilizing this feed, however adequate for spectating. If that is too uneven, think about using a USB wired connection.
- Wired sharing: Join a cellular system to the DJI Goggles 3 utilizing an information cable and an OTG adapter. The linked cellular system will show the drone’s stay feed by way of the DJI Fly app. Like Wi-Fi sharing, this technique helps just one system. Latency is way decrease than WiFi.
- Viewers mode: Activate the printed operate within the DJI Goggles 3 menu, permitting a number of goggles to obtain the stay feed with out a viewer restrict. That is superb for sharing the flying expertise with an viewers.
Observe: Needless to say you’ll be able to solely use one sort of connection at a time, whether or not connecting to goggles or a cellular system.
Conclusion
By following these setup steps and suggestions, you’ll be able to seize beautiful aerial footage along with your DJI Avata 2 Drone. Get pleasure from your flight!
Edit Historical past
- Apr 2024 – Directions written for the evaluate of the Avata 2.
- Aug 2024 – Created a separate publish for this setup information.