Have you ever ever misplaced your FPV drone in a discipline or a dense space? Discovering it with out a beeper is usually a daunting activity. Fortunately, there’s a nifty characteristic referred to as DShot Beacon that makes use of your motors as beepers. On this article, I’ll stroll you thru easy methods to arrange DShot Beacon in Betaflight.
What’s DShot Beacon?
DShot Beacon is a characteristic that permits your drone’s motors to make a beeping sound identical to the startup chant you get whenever you first plug within the battery. In case you don’t have an exterior beeper put in in your FPV drone, having DShot Beacon setup will make it simpler to find your drone when it’s misplaced. The setup course of is simple, however there are a couple of key steps it is advisable to comply with to make sure it really works accurately.
Warning: operating motor beeper for too lengthy might lead to motor overheat, even burns out your motors in excessive instances. Keep away from setting beeping quantity too excessive and scale back the beeping frequency to cut back the prospect of burnt motors.
{Hardware} Necessities
Earlier than diving into the setup, guarantee your ESCs (Digital Velocity Controllers) help DShot ESC protocol. If they’re operating the next firmware, they need to help DShot Beacon:
- Bluejay
- AM32
- BLHeli_S
- BLHeli_32
In case your ESC solely help PWM, Oneshot and Multishot however doesn’t help DShot, then DShot Beacon received’t work.
A bit out of subjects, should you’ve ever questioned how ESC’s could make sound, they don’t. The sound is definitely coming from the motors, which the pitch and quantity of the sound is managed by sign from the ESC. It’s even attainable to play a jingle with motors at startup: https://oscarliang.com/blheli-32-custom-startup-tone-music/
Setting Up DShot Beacon
Betaflight Configuration
Hook up with Betaflight Configurator: Join your flight controller to your laptop and open Betaflight Configurator.
Choose DShot Protocol: Navigate to the Configuration tab. Below “ESC/Motor Options,” choose the suitable DShot protocol relying on what PID Loop Frequency you might be operating:
- For 2KHz or 1.6KHz, select DShot150.
- For 4KHz or 3.2KHz, select DShot300.
- For 8KHz, select DShot600.
Allow DShot Beacon: Scroll right down to the “DShot Beacon Configuration” part. Allow RX_LOST, RX_SET, or each.
- When RX_SET is enabled, motors will beep whenever you activate the beeper swap.
- When RX_LOST is enabled, motors will beep when the drone loses radio connection.
When each choices are disabled, DShot Beacon is successfully disabled. When the drone is armed, DShot Beacon is disabled.
Select Beacon Tones: You possibly can choose one of many 5 out there beacon tones. Though the sound doesn’t change considerably, having totally different tones may be helpful for differentiation. Be aware that setting it to 0 will disable motor beeper. I usually choose quantity 3.
Beeper Configuration: Additional down within the Configuration tab, you’ll discover “Beeper Configuration.” Whilst you don’t have to vary these settings, you’ll be able to customise them to your desire. A professional tip is to disable the USB beeper you probably have an exterior buzzer to forestall it from beeping each time you hook up with Betaflight.
Save and Reboot: After making these modifications, click on “Save and Reboot.”
Setting Up Beeper Mode
Modes Tab: Go to the Modes tab in Betaflight Configurator. Right here, you’ll arrange a swap in your transmitter to activate the beeper mode. In case you need assistance with establishing Modes tab, I’ve a tutorial right here: https://oscarliang.com/betaflight-modes/
Disable the choice “Disguise unused modes” to show all of the out there modes.
Add Vary: Discover “Beeper” and click on “Add Vary.” Assign it to an AUX swap in your transmitter. For instance, I exploit AUX 3 (Channel 7) for Beeper.
Configure Change Vary: Set the swap vary for the beeper to the specified place. I want setting it on the finish of the swap vary, making certain it’s solely activated when the swap is totally down.
Save Settings: Click on “Save” to use your settings.
Sensible Use Case
Think about your drone is misplaced in a bush and you’ll’t see it. By activating the beeper, the motors beeping will enable you find the drone. For small drones, the beeping may not be very sturdy as a result of the motors are fairly tiny, on this case, you may also attempt arming and disarming instantly to make some extra noise and motion. Don’t arm it for too lengthy if the props are obstructed whereas armed, you would burn the motors.
Adjusting Beeping Quantity and Delay
You possibly can modify the DShot Beacon quantity within the ESC configuration device, on this instance, BLHeliSuite:
- Beacon Energy: how loud you need the motors to sound (default 80, vary from 1 to 255); as much as 120 are good values IMO. Strive totally different values and test if the motors and ESC would get too scorching over a time frame. I don’t advocate setting this too excessive to forestall motors and ESC overheat.
- Beacon Delay: It is after how lengthy the motors begins to beep when being idle. It’s helpful in case you can not activate beeper out of your radio, so the motors begin beeping mechanically. Nonetheless it may very well be annoying if you find yourself simply establishing your quad on the bench (default is 10 minutes, I believe decreasing it to five minutes is a good suggestion).
Be aware that there’s additionally Beep Energy, which could appear appear related however really it has nothing to do with DShot Beacon. It solely controls the quantity of the start-up chant, we usually simply depart it on the default 40.
Conclusion
Organising DShot Beacon is a simple course of that may prevent loads of time and frustration. By following the steps outlined above, you should use your drone’s motors as efficient beepers. Whether or not you’re a newbie or an skilled pilot, this characteristic is a useful addition to your FPV toolkit.
Edit Historical past
- Jun 2017 – article created
- Jul 2024 – Information rewritten for Betaflight 4.5